Welcome to Hebei Nanfeng!

24kw DC600V high voltage PTC coolant heater HVCH for electric trucks

Short Description:

Product name: high voltage coolant heater

Power:24kw

Voltage:DC600V

Qcoolant = 40 L/min
Coolant=50:50

 


Product Detail

Product Tags

Product Detail

24KW 600V PTC Coolant Heater01
24KW 600V PTC Coolant Heater03
24KW High Voltage Coolant Heater

Product characteristic:

1. Life cycle of 8 years or 200,000 kilometers;

2. The accumulated heating time in the life cycle can reach up to 8000 hours;

3. In the power-on state, the working time of the heater can reach up to 10,000 hours (Communication is the working state);

4. Up to 50,000 power cycles;

5. The heater can be connected to constant electricity at low voltage during the whole life cycle. (Usually ,when the battery is not depleted; the heater will go into sleep mode after the car is turned off);

6. Provide high-voltage power to the heater when starting the vehicle heating mode;

7. The heater can be arranged in the engine room, but it cannot be placed within 75mm of the parts that continuously generate heat and the temperature exceeds 120℃.

Technical Parameter

Parameter Description Condition Minimum value Rated value Maximum value Unit
Pn el.  Power Nominal working condition:   Un = 600 V

Tcoolant In= 40 °C

Qcoolant = 40 L/min

Coolant=50:50

21600  24000 26400 W
m Weight Net weight (no coolant) 7000 7500 8000 g
Toperating Work temperature (environment)   -40   110 °C
Tstorage Storage temperature (environment)   -40   120 °C
Tcoolant Coolant temperature   -40   85 °C
UKl15/Kl30 Power supply voltage   16 24 32 V
UHV+/HV- Power supply voltage Unrestricted power 400 600 750 V

CE certificate

CE
Certificate_800像素

Description

Necessary conditions for heater:
 The heater is controlled by CAN communication
 High voltage power supply
Low voltage power supply (BATT) or Kl15 (ignition switch voltage), Kl31 (GND)
The heater needs to set a high voltage interlock circuit
The vehicle must be equipped with an insulation monitoring device to monitor:
Over (under) voltage protection
Short circuit protection (current-limiting fuse in distribution box)
Leakage protection
 Interlock response
High voltage electric heater must be equipped with 80A current-limiting fuse
 It must be ensured that the high voltage power supply has no reverse polarity
 The vehicle needs to be powered off when overvoltage occurs
High voltage input should be precharged
The high voltage input should be equipped with a relay, when a serious fault occurs, the high voltage can be cut off
without affecting the safety of the whole vehicle

Application

This 24KW PTC Coolant Heater can only be used on electric buses and buses with good road conditions.

For other models or road conditions, please contact us in time and we will recommend the most suitable product for you, thank you!

bus watrer heater
ELECTRIC-BUS

Packaging & Shipping

Packaging methods include carton packaging, wooden box packaging, wooden pallet packaging, etc.

 

Transportation methods include air transportation, sea transportation, land transportation, rail transportation,express delivery, etc.

 

Delivery time is determined based on order quantity and shipping method.

包装
运输4

Company Profile

南风大门
Exhibition01

Hebei Nanfeng Automobile Equipment (Group) Co., Ltd is a group company with 5 factories, that specially produce parking heaters, heater parts, air conditioner and electric vehicle parts for more than 30 years. We are the leading auto parts manufacturers in China.

Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.

In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.

Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.

Lily

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.


  • Previous:
  • Next: