NF 10KW/15KW/20KW Battery PTC coolant heater for EV

Short Description:

As electric vehicles have no engine and therefore no heat source, it is necessary to install a PTC thermistor to act as a heat source. When the PTC is energised it can heat up very quickly, unlike conventional fuel cars, which need to wait for the engine to run for a while and then heat up slowly, which means that pure trams with PTC warm air conditioning heat up much faster.

Send email to us

Product Detail

Product Tags

Description

Battery PTC coolant heater is an electric heater that heats antifreeze with electricity as energy source and provides heat source for passenger cars. Battery PTC coolant heater is mainly used for heating the passenger compartment ,defrosting and removing fog on the window,or preheating battery thermal management system battery ,to meet the corresponding regulations, functional requirements.

This Battery PTC coolant heater is suitable for electric / hybrid / fuel cell vehicles and is mainly used as the main heat source for temperature regulation in the vehicle. The Battery PTC coolant heater is applicable to both vehicle driving mode and parking mode. In the heating process, electric energy is effectively converted into heat energy by PTC components. Therefore, this product has faster heating effect than internal combustion engine. At the same time, it can also be used for battery temperature regulation (heating to working temperature) and fuel cell starting load.

It is OEM customized product, the rated voltage can be 600V or 350v or others according to your requirements, and the power can be 10kw, 15kw or 20KW, which can be adapted to various pure electric or hybrid bus models. The heating power is strong, providing sufficient and sufficient heat, providing a comfortable driving environment for drivers and passengers, and can also be used as a heat source for battery heating.

Technical Parameter

Power (KW)	10KW	15KW	20KW
Rated voltage（V）	600V	600V	600V
Supply voltage (V)	450-750V	450-750V	450-750V
Current consumption (A)	≈17A	≈25A	≈33A
Flow (L/h)	＞1800	＞1800	＞1800
Weight (kg)	8kg	9kg	10kg
Installation size	179x273	179x273	179x273

Product Parts

Advantage

1.Low maintenance cost
Product maintenance free,High heating efficiency
Low cost of use,No need to replace consumables

2.Environmental protection
100% emission free,Quiet and noiseless
No waste,Strong heat

3.Energy saving and comfort
Intelligent temperature control,Closed-loop control
Stepless speed regulation,Heating quickly

4. Provide sufficient heat source, the power can be adjusted, and solve the three major problems of defrosting, heating and battery insulation at the same time.

5. Low operating cost: no oil burning, no high fuel costs; maintenance-free products, no need to replace parts damaged by high temperature combustion every year; clean and no stains, no need to clean up oil stains frequently.

6. Pure electric buses no longer need fuel for heating and are more environmentally friendly.