NF 5KW 12V liquid water parking heater

Short Description:

The structure of the water parking heater is designed for installation on M1 class models.

It is not allowed to install on O, N2, N3 class vehicles and dangerous goods transport vehicles. The corresponding regulations must be observed when installing on special vehicles. Approved by the company, it can be applied to other vehicles.

After the water parking heater is connected to the heating system of the car, it can be used for.

- Heating in the car;

- Defrost the car window glass

Preheated water-cooled engine (when technically possible)

This kind of water parking heater does not depend on the vehicle engine when working, and is integrated in the vehicle’s cooling system, fuel system and electrical system.

Send email to us

Product Detail

Product Tags

Description

Because the heating effect of the parking heating system is good, it is safe and convenient to use, and it can also realize remote control operation. It can preheat the car in advance in the cold winter, which greatly improves the comfort of the car. In some alpine regions, many people install it at their own expense, especially for trucks and RVs in use, which are basically installed.
Working principle：Model 1: It automatically >80ºC Off, and <60ºC On, until you turn off it by yourself.
Model 2: You can set its running time in the range 10-120 min.When it is adjusted to 120min, press the right button again to set it to run for unlimited time.for example, when you set its running time to 30 min, heater will stop when it ran 30 min.
If you set it to run for unlimited time, It automatically >80ºC Off, and <60ºC On, until you turn off it by yourself. It means keep the water temperature between 60ºC to 80ºC.

Technical Parameter

Heater	Run	Hydronic Evo V5 - B	Hydronic Evo V5 - D
Heater	Run
Structure type		Water parking heater with evaporative burner
Heat flow	Full loadHalf load	5.0 kW2.8 kW	5.0 kW2.5 kW
Fuel		Gasoline	Diesel
Fuel consumption +/- 10%	Full loadHalf load	0.71l/h0.40l/h	0.65l/h0.32l/h
Rated voltage		12 V
Operating voltage range		10.5 ~ 16.5 V
Rated power consumption without circulatingpump +/- 10% (without car fan)		33 W15 W	33 W12 W
Allowable ambient temperature:Heater:-Run -Storage Oil pump: -Run -Storage		-40 ~ +60 °C -40 ~ +120 °C -40 ~ +20 °C -40 ~ +10 °C -40 ~ +90 °C	-40 ~ +80 °C -40 ~+120 °C -40 ~+30 °C -40 ~ +90 °C
Allowed work overpressure		2.5 bar
Filling capacity of heat exchanger		0.07l
Minimum amount of coolant circulation circuit		2.0 + 0.5 l
Minimum volume flow of heater		200 l/h
The dimensions of the heater withoutadditional parts are also shown in Figure 2.(Tolerance 3 mm)		L = Length: 218 mmB = width: 91 mmH = high: 147 mm without water pipe connection
Weight		2.2kg

Product Size

There are three controller:on/off controller, digital timer controller and GSM phone control .you can choose any of them.

Advantage

1.Start the vehicle faster and safer in winter.
2.TT- EVO can help the vehicle start quickly and safely, quickly melt the frost on the windows, and quickly heat the cab. In the cargo compartment of a small transport truck, the heater can quickly create the most suitable temperature for low-temperature sensitive cargo, even in low-temperature weather.
3.The compact design of the TT- EVO heater allows it to be installed in vehicles with limited space. The lightweight structure of the heater helps keep the weight of the vehicle at a low level, while also helping to reduce pollutant emissions.

Application

Most large trucks and construction machinery use diesel gas heating systems, and domestic cars mostly use gasoline water heating systems.

Packing&Delivery

Packing:

1. One piece in one carry bag

2. Suitable quantity to an export carton

3. No other packing accessories in regular

4. Customer required packing is available

Shipping:

by air, sea, or express

Sample lead time: 5~7 days

Delivery time: about 25~30 days after order details and production confirmed.

FAQ

Q: Are you trading company or manufacturer?
A: We are professional manufacturer . we trade our products with our clients directly.
Q: Can you do OEM and ODM?
A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss.
Q: Can we use our own logo?
A: Yes, we can print your private logo according to your request.
Q: When can I get the price?
A: Usually we quote within 8 hours after we get your inquiry.
Q: What’s your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer’s exact situation.
Q: Which payment form you can accept?
A: T/T, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: Do you have the test and audit service?
A: Yes, we can assist to get the designated test report for product and the designated factory audit report.