NF Best Caravan RV 12000BTU Rooftop Parking Air Conditioner

1. Preparation for Installation:
This product is installed on the roof of RV. When determining your cooling requirements, the following points should be considered: Size of RV; Window area of RV (the larger the area, the more heated) ; Thickness and thermal insulation performance of insulating materials in compartment plate and roof; Geographical location where the RV is used by users.
2. Selection of Installation Position:
This product should be installed on the existing roof vent. There is usually a 400x400mm + 3mm opening on the roof after the vent is removed. When there is no vent on the roof or this product needs to be installed in other positions, it is recommended to take the following measures:
1. For the installation of a single air conditioner, the air conditioner should be installed at a position slightly ahead of the center point (as viewed from the head of the vehicle) and at the center point of left and right ends;
2. For the installation of two air conditioners, the air conditioners should be installed at 1/3 and 2/3 positions away from the front end of RV respectively, and at the center
point of left and right ends. It's best to install this product horizontally (subject to the standard that the RV stops on a horizontal surface) with a maximum gradient of not exceeding 15°.
After the installation position is determined, it is required panel to check whether there are obstacles in the installation area, and the distance between the back of vehicle body and other roof equipment should be at least 457 mm.
When the RV is moving, the top must be able to support heavy objects weighing 60kg. Generally, the static load design of 100kg can meet this requirement. Check whether there are obstacles (i.e., door openings, partition frames, curtains, ceiling fixtures, etc.) that hinder the installation of inner panel of the air conditioner.